Instructions for carrying out general repairs on vehicles with auxiliary heating

Information 

• Perform on-board diagnosis of the auxiliary heating system using the vehicle diagnostic tester  .
• If parts of the fuel system were removed or replaced, make sure that all components for extracting fuel for the auxiliary heating system are installed properly  .
• To avoid confusing the coolant hoses, mark them before removal  .

Following repair work near the fuel line for the auxiliary heating system, check the following points:

• Check that the fuel lines are routed flush with the underbody and are protected from mechanical damage  .
• Check that the fuel line for the auxiliary heating system is protected against high temperatures that could cause malfunctions  .
• Check that the fuel line is not touching any hot components  .