Ignition system

Fig 1: Ignition System Components With Torque Specification

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Screw → Tightening torque: 10 Nm (7.5 ftlb.) 
2. Ignition coil
3. Spark plug → Tightening torque: 25 Nm (19 ftlb.) → Tightening torque: 30 Nm (22 ftlb.) 
   • Electrode gap of spark plug → Control value: 0.8 mm-0.1 mm 
4. Screw/replace → Tightening torque: 20 Nm (15 ftlb.) 
5. Knock sensor
6. Pulse sender/check O-ring for damage 
7. Screw → Tightening torque: 10 Nm (7.5 ftlb.) 
8. Screw → Tightening torque: 9 Nm (6.5 ftlb.) 
9. Hall sender/replace O-ring 

not shown  - Nut securing ground line to ignition coil → Tightening torque: 10 Nm (7.5 ftlb.) 

95BAA1

Model year as of 2014

C00, C02, C05, C06, C07, C08, C09, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C32, C33, C34, C35, C36, C37, C38, C39, C41, C45, C46, C96, C97, C98, C99