Torque loss

Necessary after:

• Re-programming DME control unit
• Replacing DME control unit
• Re-programming PDK control unit

Necessary before:

• Re-calibrating PDK

How?

Engine idling

1. Preconditions:
   1. 1.1. Engine at operating temperature
2. Engine idling for 3 minutes without activating loads, press accelerator pedal once after approx. 1.5 minutes during this time
3. Engine idling for 3 minutes with air conditioning switched on, press accelerator pedal once after approx. 1.5 minutes during this time
4. Engine idling for 3 minutes with air conditioning switched on and transmission range engaged, press accelerator pedal once after approx. 1.5 minutes during this time
5. Switch off ignition (see also Information)

95BAA1, 95BAB1, 95BAD1, 95BAF1, 95BAJ1, 95BAK1, 95BAX1, 95BAZ1

Model year as of 2014, Model year up to 2020

C00, C02, C05, C06, C07, C08, C09, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C32, C33, C34, C35, C36, C37, C38, C39, C41, C45, C46, C96, C97, C98, C99