LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 791 (24 - Fuel System - Electronic Ignition 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 247019 Removing And Installing DME Control Unit >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. If a new control unit has to be installed, the values/coding must be read out using > 9818 - PIWIS Tester II  prior to removing the "old" DME control unit.

    > 247055 REPLACING DME CONTROL UNIT 

    > 247019 REMOVING AND INSTALLING DME CONTROL UNIT  - section on "Reading out"

  2. Lift up cowl panel cover.

    > WM 508719 REMOVING AND INSTALLING COWL PANEL COVER (EXCEPT PANAMERA EXECUTIVE, PANAMERA 4S SPORT EDITION, PANAMERA 4 EXECUTIVE)

  3. Remove rubber beading in front of the cross panel.
  4. Unscrew the two fastening screws on the cross panel section at the right and lift up the cross panel section.

    > WM 508119 REMOVING AND INSTALLING CROSS PANEL (DISASSEMBLING PLENUM PANEL) (EXCEPT PANAMERA EXECUTIVE, PANAMERA 4S SPORT EDITION, PANAMERA 4 EXECUTIVE)