LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 791 (24 - Fuel System - Electronic Ignition 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 246319 Removing And Installing High-Pressure Pump >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble plenum panel (fit cross panel).

    > WM 508119 REMOVING AND INSTALLING CROSS PANEL (DISASSEMBLING PLENUM PANEL) (EXCEPT PANAMERA EXECUTIVE, PANAMERA 4S SPORT EDITION, PANAMERA 4 EXECUTIVE)

  2. Fit the fuse for the fuel pump.
  3. Bleed the fuel high-pressure system. Erase the fault memory if necessary.
  4. Reset the high-pressure adaptation values and then carry out an adaptation drive. Carry out instructions in the same way as for replacing the DME control unit

    > 247055 REPLACING DME CONTROL UNIT 

scientia non olet · About LEMON Manuals