Component Overview

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: High-Pressure Pump Components Location (Turbo Engine)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

High-pressure pump, turbo engine

1	High-pressure pump
2	High-pressure line; (3 turns, tighten, loosen, tighten)
3	M6 screw on low-pressure line
4	Low-pressure line; (3 turns, tighten, loosen, tighten); counter at hexagon on high-pressure pump
5	Screw socket, M8
6	Screw socket, M6
7	Protective plate
8	Screw, M6 x 20
inset	Required line distance (5 to 8 mm) between components

Fig 2: High-Pressure Pump Components Location (Naturally Aspirated Engine)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

High-pressure pump, naturally aspirated engine

1	High-pressure pump
2	High-pressure line; (3 turns, tighten, loosen, tighten)
3	M6 screw on low-pressure line
4	Low-pressure line; (3 turns: tighten, loosen, tighten); counter at hexagon on high-pressure pump
5	Screw socket, M8
6	Screw socket, M6
7	Protective plate
8	Screw, M6 x 20
inset	Required line distance (5 to 8 mm) between components