Component Overview
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Intake module on naturally aspirated engine
| 1 | Intake module |
| 2 | Decoupling module (fastening part); observe specified tightening sequence |
| 3 | Screw, 5 x 16 |
| 4 | Pressure sensor |
| 5 | Intake module seal; check that seal is aligned and fitted correctly! |
| 6 | Heat socket |
| 7 | Screw, 6 x 50 |
| 8 | Electronic accelerator |
| 9 | Seal |
| 10 | Ball socket |
Actuator for variable intake manifold on naturally aspirated engine
| 1 | Pipe |
| 2 | Connecting piece |
| 3 | Variable intake manifold adjuster/adjusting unit |
| 4 | Lip seal |
| 5 | Connecting element |
| 6 | Vacuum unit with cover (actuator) |
| 7 | Screw, M5 x 16 |
| 8 | Driver |
| 9 | Connecting link |
| 10 | Vacuum line |
Intakt air module on turbo engine
| 1 | Intake module |
| 2 | Decoupling module (fastening part); observe specified tightening sequence |
| 3 | Screw, 5 x 16 |
| 4 | Pressure sensor |
| 5 | Intake module seal; check that seal is aligned and fitted correctly |
| 6 | Heat socket |
| 7 | Screw, 6 x 50 |
| 8 | Electronic accelerator |
| 9 | Seal |
| 10 | Ball socket |