Installing Air Box For Throttle Housing (Y-Shaped Pipe Ahead Of Throttle Valve)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- The components are installed in reverse order to removal.
- Screw-type clamps > Tightening torque 3.5 Nm (2.5 ftlb.)
- The clips on the pressure pipes must engage securely and click into place on the charge-air cooler connection pieces (check by pulling on the pipes).