Tightening sequence for intake-air distributor

WARNING: This page is about a different car, the 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Intake-Air Distributor Screws Tightening Sequence

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

7 and 8	Screw in screws by 3-5 turns
	Align intake-air distributor
1-8	Tighten screws → Tightening torque: 10 Nm (7.5 ft lb.)