Removal And Installation: Installation
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
-
CAUTION:
Installation of the oil pan and tightening must be carried out within 7 minutes of applying the sealant.
NOTE:
Right-hand shown, left-hand similar.
Apply sealant WSE-M4G323-A5 in an 8mm bead to the cylinder block in the area illustrated.
- To install, reverse the removal procedure.