Inspection And Verification
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Diagnosis by substitution from a donor vehicle is NOT
acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle.
NOTE:
Check and rectify basic faults before beginning diagnostic routines involving pinpoint tests.
For additional information, refer to Diagnosis and Testing, Engine - 3.0L.
Refer to: ENGINE - TDV6 3.0L DIESEL
- Verify the customer concern.
- Visually inspect for obvious signs of mechanical damage.
VISUAL INSPECTION CHART
MECHANICAL - Engine oil level
- Engine (turns freely)
- Coolant level
- Transmission fluid level
- Fuel level
- Coolant leaks
- Oil leaks
- Fuel leaks
- Visibly damaged or worn parts
- Loose or missing nuts or bolts
- Fuel contamination/grade/quality
- Sensor installation/condition
- If an obvious cause for an observed or reported condition is found, correct the cause (if possible) before proceeding to the symptom chart.
- If the cause is not visually evident, verify the symptom and refer to the Symptom Chart, alternatively check for Diagnostic Trouble Codes (DTCs) and refer to the DTC Index.