LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 487 (Engine - TDV6 3.0L Diesel - Gen 2/TDV6 3.0L Diesel -- Range Rover/L405) >> Engine - TDV6 3.0L Diesel - Gen 2/TDV6 3.0L Diesel >> Camshaft Front Seal >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
  1. G11601867

    Special Tool(s): 303-1119 

  2. CAUTION: Make sure the seal is installed correctly.
    NOTE: Make sure that the seal is 1mm below the face of the cylinder head.
    G11601868
  3. G11601869

    Special Tool(s): 303-1119 

  4. G11601772
  5. G11601771

    Special Tool(s): 303-1124 

  6. G11601770

    Torque Specifications: 

    Stage 1: 80 Nm 

    Stage 2: 80° 

  7. G11601769

    Special Tool(s): 303-1124 

  8. CAUTION: Only tighten the bolt finger-tight at this stage.
    G11601768
    CAUTION: Do not use the special tools to lock the camshafts. Failure to follow this instruction may result in damage to the engine or the special tools.
  9. G11695444

    Special Tool(s): 303-1126 

  10. Refer to: TIMING BELT 
  11. Refer to: SPECIFICATIONS
scientia non olet · About LEMON Manuals