LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (61 - Convertible Top, Hardtop -- 911 CARRERA (991)) >> WM 619619 Removing And Installing Convertible Top Control Unit (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

After removing and installing the convertible top control unit, the convertible top must be calibrated using PIWIS Tester II 9818  . → WM 610125 CALIBRATING CONVERTIBLE TOP .

  1. Move convertible top to service position. → 6101IN CONVERTIBLE-TOP SERVICE POSITION .
  2. Remove rear cover. → 705319 REMOVING AND INSTALLING REAR COVER .
  3. Remove trim panel for convertible top compartment. → 700819 REMOVING AND INSTALLING TRIM PANEL FOR CONVERTIBLE TOP COMPARTMENT .
scientia non olet · About LEMON Manuals