LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (61 - Convertible Top, Hardtop -- 911 CARRERA (991)) >> WM 619019 Removing And Installing Convertible-Top Compartment Lid (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Adjusting Convertible-Top Compartment Lid

Adjusting Convertible-Top Compartment Lid

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check contours with respect to the side panels, convertible top and rear lid. → Gap dimensions - REAR .
    1. 1.1. Loosen fastening nuts on convertible-top compartment lid.
    2. 1.2. Loosen fastening screws for the catch bar.
    3. 1.3. Turn adjusting elements at the left and right.
    4. 1.4. Adjust the contours by moving the convertible-top compartment lid at the hinges.
    5. 1.5. Screw on fastening nuts on the convertible-top compartment lid. Tightening torque 9.7 Nm (7.5 ftlb.) 
    6. 1.6. Tighten fastening screws on the catch bar. Tightening torque 9.7 Nm (7.5 ftlb.) 
scientia non olet · About LEMON Manuals