Starter And Generator
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Terminal 50 line to starter | Collar nut, M6 | Tightening torque | 6.5 Nm (5 ftlb.) | ||
| B+ line to starter | Collar nut, M8 | Tightening torque | 18 Nm (13 ftlb.) | ||
| Starter | External Torx screw, M10 x 35 | Tightening torque | 45 Nm (33 ftlb.) | ||
| B+ line to generator | Collar nut, M8 | Tightening torque | 18 Nm (13 ftlb.) | ||
| Generator to crankcase/cylinder head | External Torx screw, M8 x 90 | Tightening torque | 15 Nm (11 ftlb.) | ||
| Start/Stop voltage converter to body | Plastic nut | Tightening torque | 2.5 Nm (2 ftlb.) |