LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 282 (46 Brakes - Brake Mechanism -- 911 CARRERA (991)) >> WM 468519 Removing And Installing Spreader Device (Actuator) (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition") >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install brake shoes. → Installing Parking-Brake Shoes  .
  2. Install brake disc. → Installing Rear Brake Disc  .
  3. Fit brake calliper. → Installing Rear Brake Calliper .
  4. Fit wheel.

    → Installing Wheel .

    → Installing Wheel With Central Bolt .

    Information 

    If new brake discs and/or new brake shoes are installed on the vehicle, they must be worn in before calibration (not PCCB!). → 468350 GRINDING DOWN PARKING-BRAKE SHOES .

    If a new actuator was installed, this must be confirmed in PIWIS Tester II 9818  .

    • >>Control unit overview<< >>Parking brake<< >>Drive links/checks<< >>Confirm actuator replacement<<. 
  5. Adjust, grind down and calibrate the electric parking brake (EPB) using PIWIS Tester II.

    → 468316 ADJUSTING AND CALIBRATING PARKING-BRAKE SHOES .

    → 468350 GRINDING DOWN PARKING-BRAKE SHOES .