Information On Removing And Installing Rear PCCB Brake Disc
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Information
- When replacing the brake discs and/or brake shoes, it is necessary to grind down the brake shoes for the electronic parking brake (EPB). The routine is started using PIWIS Tester II . → 468350 GRINDING DOWN PARKING-BRAKE SHOES
- Grinding down applies only to grey cast-iron brakes with one-piece brake discs.
- There is no need to grind down grey cast-iron brakes on 911 Turbo (991) and 911 GT3 (991) vehicles because compound brake discs with aluminum brake disc hubs are installed.
- There is no need to grind down PCCB brake discs/parking-brake shoes.
With the following exception: It is not necessary to grind down PCCB brake discs/brake shoes - same procedure as for removing and installing rear grey cast-iron brake discs.