LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (60 - Sliding Roof, Tilting Roof -- CARRERA (997)) >> WM 606119 Removing And Installing Fabric Lining (911 TARGA 4, 911 TARGA 4S) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Preliminary work for removing front fabric lining.
    1. 1.1. Remove trim panel for sliding/lifting roof. → REMOVING ROOF LINING 
  2. Preliminary work for removing rear right fabric lining.
    1. 2.1. Remove front right fabric lining. → Removing Fabric Lining 
  3. Preliminary work for removing rear left fabric lining.
    1. 3.1. Remove front left fabric lining. → Removing Fabric Lining 
      NOTE: Components stored or set down incorrectly
      • Risk of damage to component surfaces

      → Set the component down on a clean surface, workbench or assembly fixture.

    2. 3.2. Remove roof assembly. → Removing Roof Module 
    3. 3.3. Mount roof assembly on assembly fixture. → Mounting Roof Assembly On Assembly Fixture  
scientia non olet · About LEMON Manuals