LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (60 - Sliding Roof, Tilting Roof -- CARRERA (997)) >> WM 604219 Removing And Installing Seal For Sliding Roof (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 Turbo S Coupe, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS) >> Installing Seal For Sliding Roof

Installing Seal For Sliding Roof

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position seal for sunroof centered at the front (joint) -arrow A-  and attach evenly to the outer roof panel all the way round, then press on in an upward direction.
    Fig 1: Installing Seal For Sliding Roof
    G09824665Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals