LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (60 - Sliding Roof, Tilting Roof -- CARRERA (997)) >> WM 603755 Replacing Metal Guide Tube For Holder Unit (911 TARGA 4, 911 TARGA 4S) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Components stored or set down incorrectly
  • Risk of damage to component surfaces

→ Set the component down on a clean surface, workbench or assembly fixture.

  1. Remove roof assembly. → Removing Roof Module 
  2. Mount roof assembly on assembly fixture. → Mounting Roof Assembly On Assembly Fixture  
  3. Detach sunroof motor and set it to one side. → Removing Electric Motor For Sunroof 
  4. Detach "Close" sunroof microswitch and set it to one side. → Replacing Microswitch For Closing The Sunroof  
scientia non olet · About LEMON Manuals