LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (60 - Sliding Roof, Tilting Roof -- CARRERA (997)) >> WM 603555 Replacing Holder Unit (Drive Mechanism) (911 TARGA 4, 911 TARGA 4S) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install wire harness for sun blind. → INSTALLING WIRE HARNESS FOR CONVERTIBLE TOP 
  2. Install right fabric lining. → Installing Fabric Lining 
  3. Install frame for sunroof cover. → Installing Frame For Sliding Roof 
  4. Connect roof assembly and vehicle using an adapter cable 9758  .
  5. Adjust holder unit (drive mechanism). → 603515 ADJUSTING HOLDER UNIT (DRIVE MECHANISM) 
  6. Carry out a function test from the vehicle using the adapter cable 9758  .
  7. Install roof assembly. → Installing Roof Module 
scientia non olet · About LEMON Manuals