LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 182 (10 - Engine - Crankcase, Suspension -- CARRERA (997)) >> WM 100137 Disassembling And Assembling Engine (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO & Gt3) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit flywheel or drive plate for converter → WM 136019 REMOVING AND INSTALLING DUAL-MASS FLYWHEEL - TURBO or → WM 136019 REMOVING AND INSTALLING FLYWHEEL - PDK TRANSMISSION - TURBO .
  2. Fit the clutch → 305019 REMOVING AND INSTALLING CLUTCH .
  3. Loosen engine on the assembly support with an engine lift and remove lifting platform. Get another person to help you do this.
  4. Screw off screw sleeves for the engine support on the engine/transmission flange and remove support.
  5. Fit transmission → WM 343527 REMOVING AND MOUNTING TRANSMISSION .
  6. Install engine → 100119 REMOVING AND INSTALLING ENGINE .
scientia non olet · About LEMON Manuals