LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (34 - Mechanical Gear-Shift System - Actuation, Housing -- CARRERA (997)) >> WM 347219 Removing And Installing Transmission Oil Pump (Gt2, Gt3 & Gt3 RS) >> Installing Transmission Oil Pump

Installing Transmission Oil Pump

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Grease the sealing rings on the transmission oil pump with Liqui-Moly for example.
  2. Install transmission oil pump.
    Fig 1: Installing Transmission Oil Pump
    G09823926Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 2.1. Carefully tap transmission oil pump -B-  into the transmission housing using a rubber hammer.
    2. 2.2. Screw screws -A-  into the transmission oil pump.

      → Tightening torque: 23 Nm (17 ft. lb.) 

scientia non olet · About LEMON Manuals