LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (34 - Mechanical Gear-Shift System - Actuation, Housing -- CARRERA (997)) >> WM 343537 Disassembling And Assembling Transmission (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO) >> Installing Front Transmission Cover

Installing Front Transmission Cover

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install front transmission cover.

    Coat front transmission cover with Loctite 574.

    Position and press on front transmission cover and screw in and tighten screws -1-  .

    → Tightening torque: 23 Nm (17 ft. lb.) 

    Fig 1: Identifying Front Transmission Cover
    G09823882Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals