Brake calliper
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Threaded connection securing brake calliper to wheel carrier, M12 x 1.5 | Replace screws on front and rear axle whenever removed. | Tightening torque | 85 Nm (63 ftlb.) | ||
| Threaded connection securing brake pressure line to brake calliper, M10 x 1 | Tightening torque | 16 Nm (12 ftlb.) | |||
| Threaded connection securing connecting line to brake calliper, M10 x 1 | Tightening torque | 12 Nm (9 ftlb.) | |||
| Threaded connection securing bleeder screw to brake calliper, M10 x 1 | Tightening torque | 8-12 Nm (6 - 9 ftlb.) |