LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (10 - Engine - Crankcase, Suspension -- PANAMERA (970)) >> WM 103719 Removing And Installing Torque Support (PANAMERA, PANAMERA S, PANAMERA 4, PANAMERA 4S, PANAMERA Turbo, PANAMERA GTS, PANAMERA Turbo S, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Torque support to body and valve cover Always use new aluminum screws Initial tightening 20 Nm (15 ftlb.)    
Torque support to body and valve cover   Final tightening 180°    
Torque support to engine bracket and supporting frame M10 Initial tightening 50 Nm (37 ftlb.)    
Torque support to engine bracket and supporting frame M10 Final tightening 90°    
Torque support to engine bracket and supporting frame M10 Initial tightening 50 Nm (37 ftlb.)    
Torque support to engine bracket and supporting frame M10 Final tightening 90°    
scientia non olet · About LEMON Manuals