LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (47 - Brakes - Hydraulic Brake System, Regulator -- PANAMERA (970)) >> WM 477619 Removing And Installing Vacuum Pump (All Models) >> Removing Vacuum Pump

Removing Vacuum Pump

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

The vacuum pump -1-  is installed at the rear of the right cylinder head on the V engine.

Fig 1: Identifying Vacuum Pump Components
G09808159Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Vacuum pump
  2. Screw, M6 x 25
  3. Sealing ring
  4. Sealing ring
  1. Pull vacuum hose -3-  off the vacuum pump connection piece. Carefully press secondary-air hoses aside.
  2. Remove vacuum pump.
    1. 2.1. Unscrew fastening screws -2-  .

      Turn the vacuum pump -1-  to the side and guide it past the fuel low-pressure line.

      Fig 2: Identifying Vacuum Pump Fastening Screws
      G09808160Courtesy of PORSCHE CARS NORTH AMERICA, INC.