LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (47 - Brakes - Hydraulic Brake System, Regulator -- PANAMERA (970)) >> WM 471519 Removing And Installing Brake Master Cylinder (All Models) >> Installing Brake Master Cylinder

Installing Brake Master Cylinder

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information 

When replacing the brake master cylinder or the brake fluid reservoir, the latter is not repositioned until the brake master cylinder has been installed.

  1. The brake master cylinder is installed in reverse order to removal.

    Brake master cylinder to brake booster: Tightening torque 49 Nm (36 ftlb.) 

    Brake pressure lines to brake master cylinder: Tightening torque 14 Nm (10.5 ftlb.) 

scientia non olet · About LEMON Manuals