| Filler neck for windscreen washer system to body |
Internal Torx screw, M6 x 14 |
Tightening torque |
7 Nm (5 ftlb.) |
|
|
| Windscreen-washer reservoir to body |
Internal Torx screw, M6 x 16 |
Tightening torque |
7 Nm (5 ftlb.) |
|
|
| Wiper linkage to body |
Internal Torx screw, M6 x 28 |
Tightening torque |
8 Nm (6 ftlb.) |
|
|
| Wiper arm to wiper linkage |
Hexagon nut, M10 |
Tightening torque |
32 Nm (24 ftlb.) |
|
|
| Wiper motor to wiper linkage |
Internal Torx screw, M6 x 16 |
Tightening torque |
12 Nm (9 ftlb.) |
+/-1 Nm (+/-0.5 ftlb.) |
|
| Distance from left wiper arm to cowl panel cover |
Dimension a |
Nominal value |
30 mm |
|
|
| Distance from right wiper arm to cowl panel cover |
|
Dimension |
Nominal value |
34 mm |
|
| Distance from upper edge of windscreen to spray point of inner spray jet |
Dimension a |
Length |
200 mm |
|
|
| Distance from side edge of windscreen to spray point of inner spray jet |
Dimension b |
Length |
535 mm |
|
|
| Distance from upper edge of windscreen to spray point of centre spray jet |
Dimension c |
Length |
325 mm |
|
|
| Distance from side edge of windscreen to spray point of centre spray jet |
Dimension d |
Length |
335 mm |
|
|
| Distance from upper edge of windscreen to spray point of outer spray jet |
Dimension e |
Length |
480 mm |
|
|
| Distance from side edge of windscreen to spray point of outer spray jet |
Dimension f |
Length |
165 mm |
|
|
| Wiper arm for rear window washer to wiper axle |
Hexagon nut, M8 |
Tightening torque |
19 Nm (14 ftlb.) |
|
|
| Wiper motor for rear window washer to rear lid |
Hexagon nut, M6 |
Tightening torque |
8 Nm (6 ftlb.) |
|
|
| Distance from centre wiper lip to lower edge of windscreen |
Dimension a |
Nominal value |
25 mm |
|
|