Installing Inner Side Member

Information: 

• Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive  .
• The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed  .
• Do not begin bonding work until all materials and tools necessary for later repair work are available  .

1. 1.1. Apply adhesive to the marked areas. WM 5X00IN WORKING WITH BODY STRUCTURAL ADHESIVE 000.043.206.30 or WM 5X00IN WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00 .. Application depth: 3.0 mm 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Applying adhesive 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installing inner side member 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installing inner side member 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installing inner side member