Installing Upper Front Roof Frame

Information: 

• Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive  .
• The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed  .
• Do not begin bonding work until all materials and tools necessary for later repair work are available  .

1. Fit in lower part of roof frame.
   1. 1.1. Resistance spot-weld lower part of roof frame.

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Installing lower part of roof frame 

2. Install upper front roof frame and check that it fits perfectly. Check gap dimensions. Refer to WM 6X00IN GAP DIMENSIONS .
   1. 2.1. Apply adhesive to the areas marked in yellow. Refer to WM 6X00IN GAP DIMENSIONS→ Application depth: 3.0 mm 

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Applying adhesive 

3. Resistance spot-weld upper part of roof frame.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Installing upper part of roof frame