Technical values for rear seat
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screws for supporting bow | Tightening torque | 12 Nm (9 ftlb.) | |||
|
Securing supporting bow |
|||||
| Fastening screw for inner backrest mount (on body side) | Tightening torque | 20 Nm (15 ftlb.) | |||
|
Removing inner mount for rear backrest |
|||||
| Fastening screw for outer backrest mount (on body side) | Tightening torque | 20 Nm (15 ftlb.) | |||
|
Removing outer mount for backrest |
|||||
| Mount for load-through provision (on backrest side) | Item 1 | Tightening torque | 39 Nm (29 ftlb.) | ||
|
Removing load-through provision mount |
|||||
| Inner mount for rear backrest (on backrest side) | Item 2 | Tightening torque | 39 Nm (29 ftlb.) | ||
|
Removing inner mount for rear backrest |
|||||
| Fastening screws for rear backrest lock | Item 1 | Tightening torque | 26 Nm (19 ftlb.) | ||
|
Removing backrest lock |
|||||
| Fastening screw for rear backrest lock, center | Item 1 | Tightening torque | 26 Nm (19 ftlb.) | ||
|
Removing backrest lock |
|||||
| Fastening screws for upper trim panel on load-through provision | Item 1 to 4 | Tightening torque | 3.5 Nm (2.5 ftlb.) | ||
|
Installing upper trim panel on load-through provision |
|||||
| Fastening screw for armrest on load-through provision | Item 2 | Tightening torque | 4.5 Nm (3 ftlb.) | ||
|
Installing armrest with cover |
|||||