Technical Values -70- Trim Panels

1. Screw → Tightening torque: 2 Nm (1.5 ftlb.) 

   Front trim panel 

2. Nut → Tightening torque: 2.5 Nm (2 ftlb.) 

Cover for rear lock support 

Trim panel under dashboard at the right 

1. Screw → Tightening torque: 3 Nm (2 ftlb.) 

Mounting for trim panel under dashboard 

1, 2, 3  - Screw → Tightening torque: 4.5 Nm (3 ftlb.) 

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Fastening screw for lashing point		Tightening torque	8 Nm (6 ftlb.)
Lashing points
Armrest to door panel	Internal Torx screw, Ø 5 x 14	Tightening torque	2.3 Nm (1.5 ftlb.)