Removing Front Wire Harness
- Fog lights
- Auxiliary headlights
- ParkAssist sensor
- Front wire harness
- Release and disconnect electric plug connections -1- on the left and right fog lights.
- Release and disconnect electric plug connections -2- on the left and right auxiliary headlights.
- Release and disconnect electric plug connections -3-
on all ParkAssist sensors.NOTE:
- Some of the repair illustrations show only one side of the vehicle or describe a similar component .
- Naturally, some steps also have to be performed on the opposite side of the vehicle as well .
- Loosen all holders -5-
for the front wire harness -4-
from the front apron and remove front wire harness.
Removing front wire harness, shown on Turbo vehicle