Subsequent Work

Vehicles with auxiliary heating 

1. Route electric line for fuel pump for auxiliary heating, clip it in and connect and lock electric plug connection. → 824519 REMOVING AND INSTALLING FUEL PUMP FOR AUXILIARY HEATING - SECTION ON "INSTALLING"

   Vehicles with KESSY 

2. Route electric line for KESSY antenna at the door entry guard on the right, clip it in and connect and lock electric plug connection. → 966719 REMOVING AND INSTALLING KESSY ANTENNA - SECTION ON "INSTALLING"

   All vehicles 

3. Connect electric plug connection to airbag triggering unit and lock it. → 695319 REMOVING AND INSTALLING AIRBAG TRIGGERING UNIT - SECTION ON "INSTALLING"
4. Install PCM display and operator control unit. → 911019 REMOVING AND INSTALLING PCM DISPLAY AND OPERATOR CONTROL UNIT - SECTION ON "INSTALLING"
5. Install rear inner door sill trim at the right. → 680519 REMOVING AND INSTALLING REAR INNER DOOR SILL TRIM - SECTION ON "INSTALLING"
6. Install front side-section trim panel at the right. → 702419 REMOVING AND INSTALLING FRONT SIDE-SECTION TRIM PANEL - SECTION ON "INSTALLING"
7. Install glove compartment. → 681519 REMOVING AND INSTALLING GLOVE COMPARTMENT - SECTION ON "INSTALLING"
8. Connect electric plug connection to control unit for fuel pump and lock it. → 207019 REMOVING AND INSTALLING CONTROL UNIT FOR FUEL PUMP - SECTION ON "INSTALLING"
9. Connect electric plug connection to the gateway control unit and lock it. → 903519 REMOVING AND INSTALLING GATEWAY CONTROL UNIT - SECTION ON "INSTALLING"
10. Fit insulating mat under the rear seat.
11. Fit carpet. → 704119 REMOVING AND INSTALLING CARPET - SECTION ON "INSTALLING"

95BAA1, 95BAB1, 95BAD1, 95BAF1, 95BAJ1, 95BAK1, 95BAS1, 95BAX1, 95BAY1, 95BAZ1

Model year as of 2014

C00, C02, C05, C06, C07, C08, C09, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C32, C33, C34, C35, C36, C37, C38, C39, C41, C45, C45, C46, C96, C97, C98, C99