LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan GTS >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> 70 Linings, Insulation -- (95B) MACAN >> WM 706819 Removing And Installing C-Pillar Trim Panel (All Models Except MACAN Edition) >> Installing C-pillar trim panel

Installing C-pillar trim panel

NOTE:

Check that the fixing clips are not bent or broken.

Check that all fixing clips are positioned fully and correctly.

Replace damaged or missing clips with new ones.

Installation is performed in reverse order. Pay particular attention to the following:

  1. Place rubber door seal over the trim panel.
  2. Tighten fastening screws to the specified torque. Tightening torque 20 Nm (15 ftlb.) 

95BAA1, 95BAB1, 95BAC1, 95BAD1, 95BAF1, 95BAJ1, 95BAK1, 95BAS1, 95BAX1, 95BAY1, 95BAZ1

Model year as of 2014

C00, C02, C05, C06, C07, C08, C09, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C32, C33, C34, C35, C36, C37, C38, C39, C41, C45, C45, C46, C96, C97, C98, C99

scientia non olet · About LEMON Manuals