Installing TV Tuner
CAUTION:
Incorrect handling of optical waveguides
- Risk of damage to optical waveguide
→ Observe the requirements for working with and installing optical waveguides.
NOTE:
Always comply with the regulations for handling ESD-sensitive components!
- Always wear approved work clothes and shoes when carrying out assembly work.
- Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation.
- Do not touch electric pins and plug contacts.
- Installation is performed in reverse order to removal.
- Tighten fastening screws securing TV tuner to holder. Tightening torque 6 Nm (4.5 ftlb.)
- Tighten fastening nuts securing TV tuner holder to the body. Tightening torque 9 Nm (6.5 ftlb.)