Removing Pulley (Vibration Balancer)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

> 9679/1 - Counter-hold tool must be inserted into the vibration damper and turned until it locks. >

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Counter-hold tool in vibration damper

NOTIFICATION

Incorrect handling of tools
- Risk of damage to the body
  → Only use tools approved by Porsche.
  
  → Always ensure that the tool Is seated correctly.
  
  → Protect the body and Interior of the vehicle from damage with protective covers.
  
  → Cover delicate components with cardboard or sheetmetal panels.
Information

Protect the radiator fins using cardboard or a sheetmetal panel to prevent damage.

Cover wing and peripheral parts to protect them.
Fit large torque wrench > or T-piece -2- (large socket, width across flats 27) and loosen central screw for balancer.
Do not use the screw again. Use a tubular handle -1- . If necessary. Loosening torque is very high.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Large torque wrench on central screw

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Use of tool for vibration damper
Unscrew central screw and pull vibration damper forward and down. >

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Vibration damper