LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 795 (13 - Engine - CRANKGEAR, Pistons 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 137419 Removing And Installing Crankshaft Sealing Ring For Pulley/Vibration Balancer >> Removing Crankshaft Sealing Ring For Pulley/Vibration Balancer

Removing Crankshaft Sealing Ring For Pulley/Vibration Balancer

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the four fastening screws -Arrows-  and remove joint flange with sealing ring.

    Replace joint flange and sealing ring.

    G15197976Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing joint flange with sealing ring

  2. Clean contact surfaces.
scientia non olet · About LEMON Manuals