Installing Belt TENSIONER

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Damper/tensioner

Information

When fitting the damper element/tensioner, ensure that the label can be read from outside.
The bellows must be facing upwards.
Tensioner to lever. M8 -arrow- > Tightening torque 32 Nm (24 ftlb.)

Position belt tensioner -2- .

Fit fastening screws -3- .

Use correct tightening torques

> Refer to 1001TW Tightening torques, tightening sequences, assembly overviews in the appropriate service information.

Fig 1: Belt Drive Components Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Belt drive

1	Deflection roller 2
2	Hydraulic belt tensioner
3	Screw, M8 x 96
4	Deflection roller 1
5	Dual poly V-belt