LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 795 (13 - Engine - CRANKGEAR, Pistons 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 136019 Removing And Installing Flywheel >> Installing Flywheel

Installing Flywheel

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Block the flywheel. To do this, attach > 9538/1 - 9538/1 toothed segment to a screw hole at the bottom of the oil guide housing so that at least one tooth engages with the ring gear.
    G15197970Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Toothed segment

  2. Fit new screws crosswise. > Initial tightening 60 (44 ftlb.)  Nm and > Final tightening 90°
    G15197971Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    PDK it flywheel

    1  . Flywheel
    2.  Fastening screw
scientia non olet · About LEMON Manuals