LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 795 (13 - Engine - CRANKGEAR, Pistons 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 134819 Removing And Installing Crankshaft >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine.

    > 100119 REMOVING AND INSTALLING ENGINE

  2. Remove transmission from engine.

    > Refer to 343527 Removing and mounting transmission in the appropriate service information. 

    or

    > WM 373427 REMOVING AND MOUNTING PORSCHE DOPPELKUPPLUNG (PDK) (EXCEPT PANAMERA S E-HYBRID, PANAMERA S HYBRID, PANAMERA EXECUTIVE, PANAMERA GTS, PANAMERA TURBO S,)

  3. Secure engine on assembly support.

    > 1001IN SECURING ENGINE ON ASSEMBLY SUPPORT (MOUNTING BRACKET)

  4. Drain engine oil. For details, see

    > 170117 DRAINING AND FILLING ENGINE OIL (CHANGING ENGINE OIL)

  5. Disassemble the engine. Cylinder heads are removed, but must remain intact. The starter, knock sensors, thermostat housing and coolant guide remain fitted on the crankcase. For details, see

    > 1001Z1 DISASSEMBLING ENGINE

scientia non olet · About LEMON Manuals