LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 795 (13 - Engine - CRANKGEAR, Pistons 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 134819 Removing And Installing Crankshaft >> Information >> Component Overview

Component Overview

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Crankshaft Components Location
G15197955Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Crankshaft

Crankshaft
Straight pin, 6x20
Spring, 5 x 6.5
Thrust washer (grooves facing out)
Main bearing shell, upper
Main bearing shell, lower
Shaft sealing ring => Do not touch sealing ring lip! Clean crankshaft flange and oil lightly
View of crankshaft flange
Crankshaft bearing classification (four types) Yellow; Blue, Red; Green => (example: GGGGG-BBBB; 5 main shaft bearings with yellow marking, 4 double (8) connecting rod bearings with blue marking) => For numbering, see
Direction of travel (main bearing 1 is the first in direction of travel against output)