Technical Values
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Brace plate to rear body | Hexagon-head bolt, M10 x 40 - initial tightening and torque angle | Tightening torque | 30 Nm (22 ftlb.) | +90 Grad | |
| Transmission bracket to body | Hexagon-head bolt, M10 x 50 | Tightening torque | 65 Nm (48 ftlb.) | ||
| Transmission support to body | Collar nut, M10 | Tightening torque | 65 Nm (48 ftlb.) | ||
| Transmission bracket to transmission mount | Screw, M12 x 140 with M12 collar nut | Tightening torque | 120 Nm (89 ftlb.) | ||
| Impact absorber to Porsche Doppelkupplung (PDK) | M8 screw | Tightening torque | 30 Nm (22 ftlb.) |