LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 280 (42 Rear Wheel Suspension, Drive Shaft -- 911 CARRERA (991)) >> WM 425819 Removing And Installing Rear Wheel Bearing (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition", Gt3, Gt3 RS) >> Tools

WM 425819 Removing And Installing Rear Wheel Bearing (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition", Gt3, Gt3 RS): Tools

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Designation Type Number Description  
Pressure piece VW tool 30-205  
G09992988
Centre the press-on sleeve Special tool 9694/3  
G09992989
Position the separating device Commercially available tool Nr.111  
G09992990
test card Commercially available tool Nr.147-2  
G09992991
pressure piece VW tool VW 454  
G09992992
support rails VW tool VW 457  
G09992993