LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (42 - Rear Wheel Suspension, Drive Shafts -- PANAMERA (970)) >> WM 428855 Replacing Upper Concave Washer (Except PANAMERA Executive, PANAMERA GTS, PANAMERA Turbo S, PANAMERA 4 Executive, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove rear axle. → 420519 REMOVING AND INSTALLING REAR AXLE HOUSING (CHASSIS SUBFRAME) 
  2. Remove accessories in the repair area.
    1. 2.1. Remove accessories in the repair area according to the extent of damage on the vehicle.
  3. Cover accessories adjacent to the repair area on the vehicle.
    1. 3.1. Cover all accessories remaining on the vehicle and adjacent areas with fire-proof protective covers.
  4. Reshape connection area of the sheetmetal parts to be replaced. See Information on aluminum repairs → 5X00IN Information On Aluminum Repairs
  5. Expose joint areas.
    1. 5.1. Remove underbody protection, paint, etc. from the joint areas of the body using a hot-air gun or rotary brush.
scientia non olet · About LEMON Manuals