LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (42 - Rear Wheel Suspension, Drive Shafts -- PANAMERA (970)) >> WM 421319 Removing And Installing Rear-Axle Running Gear Braces (Except PANAMERA Executive, PANAMERA GTS, PANAMERA Turbo S, PANAMERA 4 Executive, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Removing And Installing Rear-Axle Chassis Subframe Struts >> Installing Rear-Axle Chassis Subframe Struts

Installing Rear-Axle Chassis Subframe Struts

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. The chassis subframe struts are installed in reverse order to removal.

    W-strut to chassis subframe: Tightening torque 50 Nm (37 ftlb.) 

    W-strut to chassis subframe and body: Tightening torque 23 Nm (17 ftlb.) 

    Chassis subframe strut to chassis subframe: Tightening torque 33 Nm (24 ftlb.) 

scientia non olet · About LEMON Manuals