LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (94 - Lights, Lamps, Switches, Exterior -- PANAMERA (970)) >> WM 941555 Disassembling And Assembling Bi-Xenon Headlights (Except PANAMERA S Executive, PANAMERA Turbo Executive, PANAMERA Turbo S, PANAMERA Turbo S Executive, PANAMERA GTS, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Disassembling And Assembling Bi-Xenon Headlights >> Assembling Bi-Xenon Headlights

Assembling Bi-Xenon Headlights

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Visually inspect plug contacts for signs of soiling and corrosion.

  1. Connect plug connection to the holder.
  2. Insert gas-discharge headlight holder into the headlight holder and turn it clockwise -arrow-  .
    Fig 1: Turning To Install Gas-Discharge Headlight Holder
    G09814783Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Clip control unit connector into the assembly cover.
  4. Fit assembly cover on headlight housing.
  5. Fit control unit on headlight housing.
scientia non olet · About LEMON Manuals