LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 10 - Engine - Crankcase, Suspension -- (95B) MACAN >> WM 105519 Removing And Installing Oil Separator (MACAN Only) >> Installing Oil Separator

Installing Oil Separator

  1. Fit oil separator. Replace seal. 
  2. Secure oil separator.
    1. 2.1. Screw in screws by hand and tighten one after the other. Tightening torque 9 Nm (6.5 ftlb.) 
    Fig 1: Oil Separator Screws Tightening Sequence
    G11980300Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals