LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan Base >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 21 - Exhaust Gas Turbocharging -- (95B) MACAN >> WM 214319 Removing And Installing Charge-Air Cooler (MACAN Only) >> Installing Charge-Air Cooler

Installing Charge-Air Cooler

  1. Position charge-air cooler in the guides and clip it in.
    G11978193

    Charge-air cooler out 

  2. Install charge-air cooler.
    1. 2.1. Fit pressure hose on charge-air cooler at both sides.
    2. 2.2. Tighten screw-type clamps at both sides -arrow-  .
    3. 2.3. Fit and tighten fastening screw -1-  .
      G11978194

      Screw-type clamp for charge-air cooler 

scientia non olet · About LEMON Manuals